How to Clean Poison Ivy Off of Tools
How to Clean Poison Ivy Off of Tools. Many gardeners and hikers know the itchy implications of coming in contact with poison ivy and do their best to avoid touching the vines. Removing poison ivy from a garden is necessary to keep all who enter the garden safe from the rash. Some gardeners use garden tools to rip poison ivy out of the ground. While...
Many gardeners and hikers know the itchy implications of coming in contact with poison ivy and do their best to avoid touching the vines. Removing poison ivy from a garden is necessary to keep all who enter the garden safe from the rash. Some gardeners use garden tools to rip poison ivy out of the ground. While removing poison ivy, they wear protective clothing thinking they are safe from the effects of poison ivy since they never touched the vine -- only to discover the telltale blisters. Unfortunately, urushiol, the itch-causing substance, remains on tools surfaces, menacingly awaiting the next touch.
Things You'll Need
Plastic tub, trashcan or bucket
Grease fighting detergent
Rubber gloves
Eye protection
Long pants
Long-sleeve shirt
Mask
Poison ivy lotion
Rag
Garden hose
Isopropyl alcohol
Fill a large plastic tub, trashcan or bucket with hot water. Add grease-fighting detergent according to the manufacturer's directions based on the amount of wash water. Emulsifying detergents act to break down the poison ivy oils.
Put on tight-fitting rubber gloves, eye protection, long pants, long-sleeve shirt and a mask. Slather a commercially available poison ivy protective lotion on all exposed areas of the skin.
Place the poison ivy-infected tools in the soapy wash water, unless they are power tools. Use care so as not to allow the tools to touch any clothing other than the rubber gloves. Let the tools soak in the hot water for 10 to 15 minutes. Scrub all tool surfaces with a rag to scrub away the poison ivy. If you are cleaning power tools, dip a rag in the soapy water and wipe all surfaces with the rag.
Rinse the tools with a garden hose to remove the soapy residue. Dry the tools with a rag.
Soak a rag with isopropyl alcohol and wipe down all tools surfaces. Isopropyl alcohol helps to disinfect poison ivy-affected surfaces.
Tips & Warnings
Apply a light coat of linseed oil to protect your tools from rust after heavy water exposure.
Wash clothing and footwear in hot water and detergent to remove poison ivy.
Run an empty washing machine through one to two cycles with grease-fighting detergent before washing other clothing.
Wash the eye protection with hot water and grease-fighting detergent in case of accidental poison ivy exposure.
Discard the rubber gloves.
Disconnect the power from tools before washing them.
Do not touch the tools bare-handed until you clean them.
Check out these related posts