How to Build a Hanging Sling Chair
How to Build a Hanging Sling Chair. Hanging outside in a comfortable sling chair is a relaxing pastime perfect for reading a good book. The shade of the trees with the slight movement from the swing quickly put you at ease. You can make a sling chair simply by taking a cloth hammock and hanging it as a sling between two hooks on a strong rod from a...
Hanging outside in a comfortable sling chair is a relaxing pastime perfect for reading a good book. The shade of the trees with the slight movement from the swing quickly put you at ease. You can make a sling chair simply by taking a cloth hammock and hanging it as a sling between two hooks on a strong rod from a tree or a porch roof.
Things You'll Need
Single-person sling hammock
Electric drill
Drill bits
Measuring tape
Hardwood, 4-by 4-inch, 48 inches long
6 eye hooks (rated for 200 lbs. plus)
2 S-hooks (rated for 200 lbs. plus)
2 chain lengths
Drill pilot holes in both ends of a 4-by 4-inch 48-inch long section of hardwood about 12 inches from the ends. On the opposite side, drill two more pilot holes 6 inches from the end. Screw eye hooks rated for 200 pounds or more into each of the holes.
Secure both ends of the single-person sling hammock into the hooks 6 inches from the ends of the piece of hardwood using S-hooks.
Screw two eye hooks into the underside of a strong tree limb at least 10 feet from the ground. These will anchor your ropes without hurting the tree.
Hang sections of chain with S-hooks or hammock clips from the hooks on the tree branch. They should be long enough to hold the hardwood bar about 6 feet from the ground.
Hook the other ends of the chains to the hooks 12 inches from the ends of the hardwood bar, adjusting them until the swing seat hangs straight.
Sit in the swing and check to make sure it is hanging at the proper height, adjusting the chain if necessary.
Check out these related posts